oscam icam v3 amazing guide to install in 2025
oscam icam v9
Hi everyone in this tutoriel to install oscam icam v3 in all device, and If you are already using an older version of Oscam iCam and you’re happy with it, then you don’t need to upgrade your oscam to v9.
What is OSCam iCam?
OSCam iCam is a software-based card-sharing CAM (Conditional Access Module) that runs on popular satellite receivers and Linux-based TV devices. Its main job is to decode and manage subscription channels, letting you view encrypted content as if you had the original card—without the original limitations. The “iCam” flavor of OSCam is special because it offers better support for newer encrypted streams, like those common in Europe.
In any case, before installing please make a backup of your receiver’s configuration!
How to download emulator oscam icam v3 ?
Binärdateien für ARM- und MIPS-Empfänger können hier heruntergeladen werden:
enigma2-plugin-softcams-oscam-emu-levi45_11885-802_all.zip
How to install emulator oscam icam v3 – oscam icam anbieter ?
Oscam emulator with Icam support can be installed on almost any Enigma2 receiver, regardless of firmware. In our example, we will be installing the emulator on a Vu+ ZERO 4k receiver with OpenBh 5.1.008 firmware.
Install the emulator through command line:
To install the emulator manually, you need to have access to the receiver via telnet or ssh. You also need to have an installed version of the Oscam emulator. For example, I have oscam-stable installed. If you don’t have Oscam installed, install it via softcam menu.
Unpack the ZIP archive downloaded above on your PC. Inside the archive you will find two folders – bin, config and bouquets
Next, you must replace the executable file on your receiver with a new file from the archive… First, find where the oscam executable file is located in your receiver.
Install the emulator following :
It is usually located in /usr/bin/ or /usr/softcams/ folder. In my case, this is /usr/softcams/oscam-stable
Rename the local file oscam-icam-arm.bin (or oscam-icam-mipsel.bin for MIPS receiver) in bin folder exactly the same as you have in the receiver. In my case, I renamed the file to oscam-stable
Upload the file to the receiver, overwriting the one that is there.
Set the permissions on the file to 755. You can do this by running the command in telnet or ssh:
chmod 755 /usr/softcams/oscam-stable
Use path to your Oscam instead of /usr/softcams/oscam-stable
oscam icam kaufen – Checking if the emulator is running
Login to the receiver using telnet or ssh. Try running the emulator. In my case, I have to run the command:
/usr/softcams/oscam-stable
If you see an error like:
/usr/softcams/oscam-stable: error while loading shared libraries: libcrypto.so.0.9.8: cannot open shared object file: No such file or directory
Then you need to put the correct link to the libcrypto.so library To do this, depending on your firmware, you need to run the command (in my case):
ln -s /usr/lib/libcrypto.so.1.0.2 /usr/lib/libcrypto.so.0.9.8
or
ln -s /lib/libcrypto.so.1.0.2 /usr/lib/libcrypto.so.0.9.8
or (for example for DreamBox DM900)
ln -s /usr/lib/libcrypto.so.1.0.0 /usr/lib/libcrypto.so.0.9.8
oscam kaufen – Checking if the emulator is running
On OpenPLI firmware I had another problem. The emulator did not start, gave an error:
/usr/bin/oscam-stable: not found
To fix this error, run the command:
ln -s /lib/ld-linux.so.3 /lib/ld-linux-armhf.so.3
If the emulator starts normally, you should see something like this in the console:
————–
22:28:06 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11711-798 (arm-linux-gnueabihf)
22:28:06 00000000 s (main) System name = Linux
22:28:06 00000000 s (main) Host name = vuzero4k
22:28:06 00000000 s (main) Release = 4.1.20-1.9
22:28:06 00000000 s (main) Version = #1 SMP Sun May 1 03:26:08 UTC 2022
22:28:06 00000000 s (main) Machine = armv7l
22:28:06 00000000 s (main) Stb model = dm8000
22:28:06 00000000 s (main) Stb vumodel = vuzero4k
22:28:06 00000000 s (main) Stb boxtype = vuzero4k
22:28:06 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 4201
22:28:06 00000000 s (emu) OSCam-Emu version 798
22:28:06 00000000 s (main) signal handling initialized
22:28:06 00000000 s (config) ERROR: Cannot create file “/var/tuxbox/config/oscam.srvid2.tmp” (errno=2 No such file or directory)
22:28:06 00000000 s (reader) emulator [emu] creating thread for device emulator
22:28:06 00000000 s (main) waiting for local card init
22:28:06 020FA536 r (emu) Stream key delayer initialized
22:28:06 020FA536 r (emu) Stream relay server initialized
…..
————–
Press Ctrl+C to stop the emulator. Let’s move on to setting up the configuration files.
Setting up the Oscam configuration files – icam iptv
oscam icam anbieter , Find the location of your Oscam configuration files. They are usually located in the /etc/tuxbox/config/ folder. In my case, the files are located in the /etc/tuxbox/config/ folder.
In the previously downloaded archive in the config folder you will find an approximate configuration. In order for oscam-icam to work, you need to make changes to the following files on your receiver:
oscam.conf – open this file, before the [dvbapi] section you must add the following lines. The iCam won’t work without them:
[streamrelay]
Find the location of your Oscam configuration files. They are usually located in the /etc/tuxbox/config/ folder. In my case, the files are located in the /etc/tuxbox/config/oscam-stable/ folder.
In the previously downloaded archive in the config folder you will find an approximate configuration. In order for oscam-icam to work, you need to make changes to the following files on your receiver:
oscam.conf – open this file, before the [dvbapi] section, add the following lines:
[radegast]
port = 9090
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
user = icam
[streamrelay]
stream_ecm_delay = 0
stream_relay_ctab = 098D
Please do not delete [global] and [dvbapi] sections! Otherwise, you will not be able to watch non-icam channels (HD+, ORF, etc.)
oscam.user – open this file on your receiver, add the following lines to the end of the file:
[account]
user = icam
keepalive = 1
group = 1
Emigma2 parameters
In different firmware, the menu item is called differently. For example, in OpenATV 7.0 you need to go to Menu -> Setup -> Usage & GUI -> Customize System Settings section.
In my case (OpenBH) it is MENU -> Setup -> System -> Customise
The following parameters must be set:
Include ECM in http streams –YES
Descramble sending http streams – NO
Descramble receiving http streams – NO
Require authentication for http streams – NO
Leave a Reply